Arc Innovations Construction Products
Download PDF
Ecogrind
97.5% of the Ec0grind is made from by-products with a similar reduction in carbon footprint. Self-bonding to almost any other material. Ec0grind is for light to medium impact load and traffic areas and an aesthetic floor is required such as the following:
Concrete floors.
Concrete walkways.
Concrete parkades.
Wall plaster, can be applied to a wall and grinded down.
Ecoscreed
Ecoscreed is for light to medium impact load and traffic areas where the subgrade is uneven, or an underlayment is required such as the following:
- Concrete underlay for tiling or carpeting.
- Concrete walkways.
- Concrete parades.
- Fix up levels, it can also be used as a tile adhesive so you can fix your levels and do your tiling at the same.
Normal products usually go up to 6mm whilst this Ecoscreed can go up to 3m.
Features include:
- Exceptional resistance to abrasion.
- Exceptional low carbon footprint.
- Resistance to spalling.
- Resistance to oil and grease absorption.
- Resistance to acid and other chemical attacks.
Ecopatch
Ecopatch is a fine filled, cementitious mortar, specifically formulated for the repair of damaged concrete, covering joiner plates and similar applications. The specially selected cements contained in Ec0patch provide a mortar with strong adhesion to concrete and masonry substrates with negligible shrinkage. Ecopatch requires only the addition of water.
This main uses are for precast and patch repairs.
Features include:
- Exceptional resistance to abrasion.
- Exceptional low carbon footprint.
- Resistance to spalling.
- Resistance to oil and grease absorption.
- Resistance to acid and other chemical attack.
Ecobinder
Ecobinder is the base used in conjunction with most of our products. It’s no comparative to anything currently in the market with the closest item being low strength cements.
Ecobinder can be used as a plaster or mortar.
Features include:
- Exceptional resistance to abrasion.
- Exceptional low carbon footprint.
- Resistance to spalling.
- Resistance to oil and grease absorption.
- Resistance to acid and other chemical attack.
Ecoseal
Ecoseal 2008L is used mainly for the sealing and densification of concrete with significant benefits:
- Increase surface hardness up to 50%.
- Seal cracks.
- Increase impermeability of liquids.
- Resistance to chemical attack.
Ecoseal 2008L used as follows in constituted mix designs exhibit:
- Sealing of cracks up to 5mm.
- Reduction of crack width up to 2mm.
- Reinstate passivation of steel.
Ecogrout
Ecogrout has many different uses and its robustness means that it can be used in pressure grouting, embedding rebar in masonry walls, connecting sections of pre-cast concrete, filling voids, sealing joints such as those between tiles, fill the space between two elements for bonding them, create a water-tight seal, in the repair of concrete cracks, to fill seams and gaps in tiles, seal and fill gaps for waterproofing, soil stabilization and to give extra strength to the foundations of load-bearing
structures.
Features include:
- Exceptional resistance to abrasion.
- Exceptional low carbon footprint.
- Resistance to spalling.
- Resistance to oil and grease absorption.
- Resistance to acid and other chemical attack.
Ecotile
Each product in Arc Innovations Ec0tile range are rapid setting high strength cement based
adhesives for fixing tiles to use on walls and floors.
Our Ecotile range has 3 products:
- Ecotile Waterproof ceramic and
- Ecotile ceramic
- Ecotile porcelain
Each product in Arc Innovations Ecotile range are rapid setting high strength cement based adhesives for fixing tiles to use on walls and floors. It is used to fill the spaces between tiles and to secure tiles as its base and is
Ecotile Waterproof ceramic and porcelain is suitable for areas that will be dry or intermittently wet such as bathrooms, showers and kitchen wools and floors. It can be used on ceramic, porcelain, mosaic, decorative, granite, marble and natural stone.
What makes Ecotile Waterproof ceramic and porcelain unique is that there is currently no
waterproof product on the market so there is no product to rival.
Their main features are their high adhesion strength, its extended open time, is easily trowellable and allows for installation of tiles from top to bottom.
Features include:
- Exceptional resistance to abrasion.
- Exceptional low carbon footprint.
- Resistance to spalling.
- Resistance to oil and grease absorption.
- Resistance to acid and other chemical attack.
Premix products utilising recycled materials for the retail market
Up to 100% replacement of conventional Portland or alumina cements with eco binders based on zero carbon emission material to produce flowable bearing grouts, repair mortars and screeds
Bagged Cement (Variant 1)
Up to 80% Portland cement replacement with pulverised fuel ash (PFA), while maintaining setting times of a 100% Portland cement material and achieving the required compressive strengths of 32.5 or 42.5 categories as per SANS 501971-.
Bagged Cement (Variant 2)
Up to 95% Portland cement replacement with Ground granulated blast furnace Slag, (GGBS), while maintaining setting times of a 100% Portland cement material and achieving the required
compressive strengths of 32.5 or 42.5 categories as per SANS 501971-.
Trade of Carbon Credits
To equip clients with carbon emission savings to offset carbon tax in the production of binders and construction materials such as bricks, grouts and screeds.
Dust Suppression
Arc Innovations dust suppression is a liquid that can be used to restrict the airborne dissemination of fine particles. This involves using nozzles to spray a fine mist of water and surface active agents to capture dust particles and bring them to the ground.
Plasticiser
Plasticiser can be added to a material to make it softer and more flexible thereby increasing its plasticity. It can also be used to decrease its viscosity or to decrease friction during its handling in the manufacturing process.
Radioactive Absorption
Produce eco-concretes and eco-grouts with sucient pseudo-zeolites to alter the hardened state properties to absorb nuclear radiation and particles.
Hydrocarbon Consumption
An organic based system that can absorb hydrocarbon spillage and produce edible fruit within a few weeks. Ideally suited for industrial and commercial sites that could have petrol, oil or diesel spillage.
Road Stabilisation (Variant 1)
An organic-based system that uses mechanical stabilization which is enhanced with exposure to environmental elements. Standard chemically stabilized roads using cementitious materials are compromised when exposed to water as they are diluted and eventually washed away resulting in potholes and road degradation.
Road Stabilisation (Variant 2)
An alternate zero carbon emission based eco-binder which binds subgrades according to chemical stabilisation.
Refractory Cements
Heat resistant concretes and linings can be produced while using the eco binders with good insulation properties.
